2.7T TTX ecu Pin changes 

   

1. pin 113 br/gn to pin 5  cyl 5 injector (Pin 5 wire needs to be cut and butt connected to pin 113)

2. pin 86 and 87 are cam sensors.  (CMP 1 is 86 and CMP2 is 87. No change needed) 

3. pin 97 br/gn to pin 88 cyl 4 injector

4. pin 112 br/bl to pin 89 cyl 2 injector 

5. pin 110 gn/gr to pin 95 cyl 2 coil 

6. pin 88 br/li to pin 97 cyl 3 injector

7. pin 89 ws/ge to pin 115 cyl 6 injector  (the wire needs to be cut at pin 115 and pin 89 needs to be butt connected to the wire at pin 115 in the ecu connector)

8. pin 95 gr/br to pin 113 cyl 6 coil 

9. pin 111 gn/br to pin 47 cyl 5 coil 

10. Pin 61 bl/br to pin 65 VVT control (aux 5) (vvt br/bl wire from pin 115 needs to be butt connected to pin 61 wire)

11. Pin 65 ro/bl to Pin 63 (injector 7) Fuel pump relay  Pin 63 can be removed and end tapped up. 

12. Pin 67 li/bl needs to be butt connected to Ethanol sensor signal wire (DI8)