TOON TROLL Deck edge bow mount trolling motor system for pontoon boats. Things to consider when mounting TOON TROLL CAUTION!! TOON TROLL is designed for installation on pontoon boats that have adequate deck support. Not all pontoon boats are made the same and mounting surfaces can and do vary. Besides using the support kit provided, it may be necessary to add additional deck support. The beam system of toon troll acts as a "leaf spring" and will have minimum flex to help take stress off of the deck. 1. Damage from improper installation and use will void any warranty. It is recommended to have professional installation by a dealer or have basic mechanical skills. Ride Restyle LLC is not responsible for damage to boat, property or personal injury due to improper installation, misuse or abuse of product. 2. TOON TROLL is designed to be installed on front of your pontoon boat. DO NOT mount on sides of boat. It can be mounted on the rear (stern) of boat . 3. Deck edge trim on pontoons can and does vary in style and shape. Sometimes it might be neccesary to trim rubber bumper strip, but in most cases, it is not needed. The down bracket can rest against the rubber bumper. If when tightening hand knob and it wants to pull downward or does not feel rigid, trimming or spacers will be needed. You can test this out before trimming. Shims or spacers can be used to help create a level surface. 4. Some pontoons have aluminum sheeting underneath. This has to be removed to install toon troll. Trim for bracket and reinstall sheeting. MOUNTING SYSTEM FEATURES TOON TROLL, TOON TROLL HD and TOON TROLL SR all use the same mounting system and have been designed to require minimum hole drilling and no or limited modification to front bumper of deck trim. The hand knob allows the deck edge trim to be "sandwiched" between the TOON TROLL and under deck support angle bracket. PLEASE NOTE: On some pontoon boats, it may not be possible for underdeck angle bracket to fit tight against the deck edge of the boat, due to a lip or other type of configuration. Please see included photo of underdeck mount that shows being pressed against the deck edge trim lip which is acceptable. On some boats, it may require some trimming or notching of edge trim or cross member support to allow underdeck angle to be pressed against deck edge trim. All TOON TROLL models are easily removed and installed back on boat seconds with no tools Thank you for purchasing TOON TROLL. We are sure it will provide years of enjoyment and enhancement to your pontoon boat. If you have any questions, comments or concerns, please call or e-mail. Photos of installations can be viewed at our website. TOON TROLL, TOON TROLL HD and TOON TROLL SR are products of Ride Restyle LLC Sheboygan, WI Made in the USA phone us at 920-581-8100 or email us at riderestyle@charter.net website www.riderestyle.com or on facebook riderestyle@toontroll